We use cookies to improve your online experience. By continuing browsing this website, we assume you agree our use of cookies.
Home > Aluminum Tank Cover Fitment Hub

Aluminum Tank Cover Fitment Hub

CFMOTO 250SR Fuel Tank Cap

Aluminum Tank Cover Fitment Hub

Three different parts get sold under one set of search words, and the answer changes with each one. The stock filler-neck part is a CFMOTO 250SR fuel tank cap — keyed, sealing the tank opening, replaced only when the lock, seal or pump fails. The quick-release shell this page is built around is not that part: it is a one-piece aluminum cover that sits over the tank, and the same cover is what riders find when they search for a CFMOTO 450SR fuel tank cap for the 450 family, where the raised-profile design matters most. Read the matrix before you buy so you order the right one.

1 pieceper order
Screws not includedreuse the bike's originals
5.0 / 5from 5 reviews · 25 sold
For Spring Breeze CF 250SR 450SR 450SRS Modified Quick Removal Tank Cover 250 450 SR Gas cover Tank Cover Aluminum Alloy Fitting

Three Parts, One Search Term

The word "tank cap" gets used for a lid, a lock and a body panel. Sort the vocabulary first, because each one lands you on a different page and a different job.

These three are not the same part. Only one of them replaces the tank's outer skin.
01 — Cap

OEM-Style Gas Cap / Pump Assembly

The keyed lid that seals the filler neck, or the complete pump-and-cap assembly it sits on. It is keyed to the bike, sits flush with the stock tank line, and gets replaced when the lock, the seal or the pump itself fails.

Replaces: the filler-neck lid or the whole pump unit.

02 — Cap

Keyless CNC Aluminum Cap

A machined aluminum lid that swaps out the OEM cap for a metal face, usually with a keyless twist or press fit. It is a cap: it changes the filler-neck lid, not the bodywork wrapped around the tank.

Replaces: the cap only. Adds no tank skin.

03 — Cover

Quick-Release Aluminum Tank Cover

A one-piece molded aluminum shell that clamps over the tank with a height-increase design and comes off quickly for maintenance. Sold as one piece, without screws — the bike's original fasteners are reused.

Replaces: the tank's outer cover panel.

Fitment Matrix: Which Part Your Bike Needs

Rows are part types, columns are models. A cell reads Fits — listed only where the product listing names that model, Verify where the combination is not stated, and Not listed where the part is not offered for that model.

Swipe sideways to see every column →

Part type 250SR 250SR (later years) 450SR 450SR-S / 450SRS
Quick-release aluminum tank cover this page Fits — listed Verify Fits — listed Fits — listed as 450SRS
Keyless CNC aluminum fuel cap Fits — listed Verify Fits — listed Verify
OEM fuel pump + gas cap assembly Fits — listed as CF250SR Verify Not listed Not listed
Also listed for Keyless CNC cap: 250NK, 450NK, 650NK, 400NK, 400GT, 800MT. · Pump assembly: 250NK, 300NK.

A Verify cell means the listing does not spell out that model/year combination. Model-year trims and market variants differ, so confirm your exact bike — model, year and trim — with us before you order, especially if you ride a late-run 250SR or a 450SR-S.

Quick-release one-piece aluminum tank cover for CFMOTO 250SR and 450SR, front view

The Cover Itself: Specs, Price and Options

Everything below is what the product listing states for this exact SKU — the offer, not the fitment verdict you read above.

$12.99 ★ 5.0 · 5 reviews · 25 sold
  • MaterialAluminum alloy
  • Condition100% brand new
  • ConstructionOne-piece molding
  • RemovalQuick-removal design for fast maintenance
  • ProfileHeight-increase design
  • CoverageFull coverage of the fuel tank
  • QuantityOne piece per order
  • FastenersScrews not included — reuse the originals on the bike
  • Model type on listingCFMOTO 250SR / 450SR; title also names 450SRS

About the color selector

The option field displays the colorways run together — Black, Red, Gray and Silver combinations carrying an “-SR” suffix. Because the swatches are not visually separated on the page, match your pick against the color thumbnail and the chosen option name in the cart before you confirm.

Aluminum tank cover supplied as one piece with no screws in the box

What's in the Box — and What You Reuse

This is the single most common surprise on this part, so check it before the box arrives.

In the box 1 × aluminum alloy tank cover
Not in the box Mounting screws — none are supplied
You reuse The original screws already on the bike, fitted directly

Before the old cover comes off, lay the original fasteners out in order and check each one for chewed heads or damaged threads. A stripped original screw is the only thing that can stall this job, and it is not in the box.

Why the Cover Sits Raised: The Height-Increase Design

The raised profile is a feature, not a fitment error — and it is worth understanding before you compare photos of your stock tank.

Volume and airflow

The listing describes the height-increase component as engineered to optimize tank volume without compromising aerodynamic balance.

Overflow behaviour

The page states the design helps prevent fuel overflow risks during aggressive maneuvers or uneven terrain.

Protection

Full coverage protection is claimed against impact, scratches, environmental elements, debris and wear.

Buyer decision: expect the finished tank line to sit higher than stock. If you run a low-slung bar, a tank bag with a hard base or a tight rider-to-tank position, plan around that extra height rather than assuming the cover will sit flush.

Height-increase profile of the CFMOTO aluminum tank cover shown from the side

Install and First-Fit Check

The product is described as supporting quick assembly and maintenance. Treat this as the checking routine for a cover that reuses your existing fasteners.

Quick-release aluminum tank cover for CFMOTO 450SR during a test fit
  1. Dry-fit before you tighten anything. Set the one-piece cover on the tank with the original screws started by hand only. Confirm the filler opening is clear and the cover edges follow the tank line.
  2. Check the raised profile against your riding position. The height-increase design adds material above the stock line. Sit on the bike and check bar, glove and knee clearance before final tightening.
  3. Seat the original screws evenly. Reuse the bike's own fasteners, working around the cover in stages rather than driving one screw fully home first.
  4. Log the removal step. Quick-removal is the point of the part. Note the sequence you used once, so the next tank-off job is a repeat rather than a re-learn.

Match Your Riding Scenario to the Right Part

Pick the line that sounds like your week — each one points at a specific product fact and a specific buying decision.

Track days and frequent tank-off work

Fact: quick-removal design, one-piece molding, aluminum alloy.

Decision: buy the cover. Removal speed is the reason it exists, and the one-piece shell has no separate panels to lose.

You only lost the filler cap

Fact: a cover is bodywork; a cap is the filler-neck lid.

Decision: do not buy the cover. Go to the keyless CNC cap or the OEM-style cap and pump assembly instead.

Cosmetic refresh on a street bike

Fact: full-coverage protection is claimed against impact, scratches, debris and wear.

Decision: buy the cover, and choose your colorway from the swatches — the selector text runs together, so verify the option name in the cart.

Aggressive riding on uneven ground

Fact: the listing states the height-increase design helps prevent fuel overflow risks during aggressive maneuvers or uneven terrain.

Decision: buy the cover if that is your use case, and check the new tank height against your tank bag or bar position first.

Working on a 250SR of a later model year

Fact: the listing names 250SR, 450SR and 450SRS, but does not break out year ranges.

Decision: verify first. Send your model, year and trim before ordering rather than assuming the 250SR row covers you.

Buying for a workshop or a group

Fact: one piece per order, $12.99 each, and a 5% coupon (code Q9TIZY97) on orders over $20.00.

Decision: order multiples against the coupon threshold, and contact us for larger or trade quantities.

Bulk Orders, Trade Pricing and Custom Requests

Buying one cover for your own bike is a single click. Buying for a workshop, a race team or a dealer network needs a conversation first.

  • Fitment confirmationSend model, year and trim for any 250SR, 450SR or 450SRS build and we will confirm the match before you commit.
  • Quantity ordersOne piece per order is the standard listing. Ask about multiples and larger trade quantities.
  • Colorway requestsTell us which Black, Red, Gray or Silver “-SR” option you need and we will confirm availability.
  • Current offer5% off orders over $20.00 with coupon code Q9TIZY97.

Related Reading

Three notes to help clarify product requirements before contacting the supplier.

Why Do CFMOTO 450SR Fuel Caps Have a Raised Cover Shape?

A raised fuel cap cover changes the visual layer and edge coverage around the filler opening, giving the filler area a stronger outline and a more deliberate top surface.

Read article

Anodized-Look Finish on the CFMOTO 450SR Aluminum Tank Cover

The word anodized shapes what a buyer expects to see when the cover arrives, so it pays to know exactly which part of that word describes the surface and which part is marketing shorthand.

Read article

How to Reuse Original Bolts on a CFMOTO 450SR Fuel Tank Cap

Swapping the tank cap on a CFMOTO 450SR gets much simpler once you understand why the new aluminum cover is built around the bike's own factory bolts.

Read article

Frequently Asked Questions

what exactly is included with this aluminum tank cover?

you receive one aluminum alloy tank cover. mounting screws are not included; the cover is designed to be fitted with the original screws already on the bike.

will this cover fit my 250sr, 450sr or 450srs?

the product listing names the cfmoto 250sr and 450sr, and the title also names the 450srs. model-year and market variants are not broken out, so confirm your exact model, year and trim before ordering if your bike is a late-run 250sr or a 450sr-s/450srs.

is the cover a replacement fuel cap or a body panel?

it is an outer aluminum tank cover, not the keyed filler cap or fuel pump assembly. choose this part when you want the quick-release cover panel; choose a cap or pump assembly only if the filler lid, lock, seal or pump is the part you need to replace.

why does the finished tank sit higher than the stock line?

the cover uses a height-increase design that the listing describes as optimizing tank volume without compromising aerodynamic balance. expect the finished tank line to sit higher, and check clearance for your bars, tank bag and riding position.

how does the quick-removal design help during maintenance?

the one-piece molded aluminum shell is built for quick assembly and removal, so tank-off service does not require dismantling a multi-panel cover. dry-fit it first, then seat the original screws evenly around the cover.

how do i choose the right color option before checkout?

the selector shows black, red, gray and silver combinations with an -sr suffix, but the option text runs together on the page. match the color thumbnail and the exact option name shown in your cart before confirming the order.

X